IPUMS - NHGIS Extraction and Analysis

Exercise 1

OBJECTIVE: Gain an understanding of how the NHGIS datasets are structured and how they can be leveraged to explore your research interests. This exercise will use an NHGIS dataset to explore slavery in the United States in 1830.

This vignette is adapted from the NHGIS Data Training Exercise available here: https://pop.umn.edu/sites/pop.umn.edu/files/nhgis_training_ex1_2017-01.pdf

Research Question

What was the state‐level distribution of slavery in 1830?

Objectives

• Unzip data file and open in R
• Analyze the data using R
• Validate data analysis work using answer key

• Go to https://www.nhgis.org and click on ‘Login’ in the top right.
• If you have already registered on any Minnesota Population Center website…
• If you have not already registered…
• Click on the “Create an account”" link on the right, fill in the required information, and submit your registration.
• You will then enter the NHGIS Data Finder…
1. Find Tables
• Quick instructions
• Apply any combination of the four filters below to find 1830 slavery related tables
• Geographic Levels = ‘State’
• Years = ‘1830’
• Topics = ‘Slavery’
• Datasets = ‘1830_cPop’
• Guided instructions
• Suppose you were interested not only in slavery, but in all that’s covered by the 1830 Census.
• To view all available 1830 data, use only the Years Filter set to ‘1830’.

Q1) How many tables are available from the 1830 Census?

Q2) Other than slave status, what are some other topics could we learn about for 1830?

• Locate the Desired Table
• Let’s focus in on the slavery topic. To narrow the results, apply the Topics Filter of ‘Slavery’. (You can find it at the bottom of the list of POPULATION topics.)
• The Select Data grid now lists all the tables related to the topic of Slavery. If you don’t also have the Years Filter on, scroll down to find the 1830 tables, or utilize additional filters to further limit the available tables.
• Locate this 1830 table and answer the questions that follow: “NT12. Race/Slave Status by Sex”
• Learn About the Table in the Data Finder

Q3) Click the table name to see additional information. How many variables does this table contain?

Q4) For which geographic levels is the table available?

Q5) Close the table pop‐up window and inspect the Select Data table… What is the universe for this table?

Q6) What differentiates this table from the other available slavery tables from 1830?

Q7) Name a percentage or ratio this table would allow us to calculate that the other tables would not, based on the counts available in each table?

1. Create a Data Extract Creating a data extract requires the user to select the table(s), specify a geographic level, and select the data layout structure…
• Click the plus sign to the left of the table name to add table NT12 to your Data Cart.
• Click on the “GIS Boundary Files” Tab
• Click on the plus sign to the left of the State Geographic Level Table
• Click the green Continue button in your Data Cart.
• On the Data Options screen, select the geographic level of ‘State’.
• Click the green Continue button in your Data Cart.
• On the Review and Submit screen, select the “Comma delimited (best for GIS)” option (it doesn’t matter if you include the descriptive header rows or not), add an extract description if you wish, and click Submit.

If you refresh your browser window (click on the loop icon at top, or press F5), you will see the extract status change from ‘queued’ to ‘in progress’ to ‘complete’, at which time you will be able to click the ‘tables’ link to download the data.

• Right‐click on the ‘tables’ link for the extract you created.
• Choose ‘Save Target As…’ (or ‘Save link as…’).
• Save the zip file into ‘Documents’.
• Repeat the process for the GIS data (right-click, choose ‘Save Target As…’, …)
• The R package can read the extracts as zip files, or if you wish to open in other programs, you can unzip them, by: Right‐clicking on the ‘nhgis0001_csv.zip’ file, and select Extract All… Then click the Extract button. (Repeat for the shape if you desire).

Getting the data into R

You will need to change the filepaths noted below to the place where you have saved the extracts.

Getting the data into R

You will need to change the filepaths noted below to the place where you have saved the extracts.

Note that read_nhgis_sf relies on package sf. You can also read NHGIS data into the format used by package sp with function read_nhgis_sp.

Exercises

These exercises include example code written in the “tidyverse” style, meaning that they use the dplyr package. This package provides easy to use functions for data analysis, including mutate(), select(), arrange(), slice() and the pipe (%>%). There a numerous other ways you could solve these answers, including using the base R, the data.table package and others.

Analyze the Data

Q8) How many states/territories are included in this table?

Q9) Why do you think other states are missing?

Q10) Create a new variable called total_pop, with the total population for each state, by summing the counts in columns ABO001 to ABO006. Which state had the largest population?

Q11) Create a variable called slave_pop, with the total slave population by summing the variables ABO003 and ABO004. Which state had the largest slave population?

Q12) Create a variable called pct_slave with the Slave Population divided by the Total Population. Which states had the highest and lowest Percent Slave Population?

Q13) Are there any surprises, or is it as you expected?

Inspect the Codebook

Open the .txt codebook file that is in the same folder as the comma delimited file you have already analyzed. The codebook file is a valuable reference containing information about the table or tables you’ve downloaded.

Some of the information provided in the codebook can be read into R, using the function read_ipums_codebook().

Q14) What is the proper citation to provide when using NHGIS data in publications or researcher reports?

cat(ipums_file_info(nhgis_ddi, "conditions"))
#>
#> All persons are granted a limited license to use this documentation and the
#> accompanying data, subject to the following conditions:
#>
#> * Publications and research reports employing NHGIS data (either tabular or GIS)
#>   must cite it appropriately. The citation should include the following:
#>
#>     Steven Manson, Jonathan Schroeder, David Van Riper, and Steven Ruggles.
#>     IPUMS National Historical Geographic Information System: Version 12.0 [Database].
#>     Minneapolis: University of Minnesota. 2017.
#>     http://doi.org/10.18128/D050.V12.0
#>
#> * Publications and research reports employing school attendance areas data
#>   (either tabular or GIS) must cite it appropriately. The citation should
#>   include the following:
#>
#>     The College of William and Mary and the Minnesota Population Center.
#>     School Attendance Boundary Information System (SABINS): Version 1.0.
#>     Minneapolis, MN: University of Minnesota 2011.
#>
#> * For policy briefs or articles in the popular press, we recommend that you cite the use of NHGIS data as follows:
#>
#>     IPUMS NHGIS, University of Minnesota, www.nhgis.org.
#>
#> * If possible, citations involving school attendance areas should also include
#>   the URL for the SABINS site:
#>
#>     http://www.sabinsdata.org/.
#>
#> In addition, we request that users send us a copy of any publications, research
#> reports, or educational material making use of the data or documentation.
#> Printed matter should be sent to:
#>
#>     NHGIS
#>     Minnesota Population Center
#>     University of Minnesota
#>     50 Willey Hall
#>     225 19th Ave S
#>     Minneapolis, MN 55455

#     A: Minnesota Population Center. National Historical Geographic Information
#        System: Version 11.0 [Database]. Minneapolis: University of Minnesota. 2016.
#        http://doi.org/10.18128/D050.V11.0.

Q15) What is the email address for NHGIS to share any research you have published? (You can also send questions you may have about the site. We’re happy to help!)

Bonus - Make Maps using R

One of the reasons we are excited about bringing IPUMS data to R is the GIS capabilities available for free in R.

Q16) Make a map of the percent of the population that are slaves.